
Cooler mornings have a way of making people dust off their cycling dreams. Maybe you watched a few hundred riders roll along a car-free road and thought, why not me? A used bicycle is one of the smartest ways to start, because bikes lose a good chunk of their price the moment they leave the shop. The trick is knowing what to look at before the money changes hands, and none of it requires being a mechanic.
Start with the frame, because it’s the one part that can’t easily be fixed. Run your eyes along the tubes and look closely at the welds and joints, especially near the front of the bike and around the pedals. Cracks, deep dents and wavy paint around a joint are warning signs. Scratches and scuffs are normal and nothing to worry about, but anything that looks bent or repaired deserves a firm no.

Next, check the wheels. Lift each one and spin it, watching the rim as it passes the brake pads. A little wobble can be fixed, but a rim that visibly jumps from side to side may need replacing. Squeeze the spokes gently and listen for loose ones that rattle. Tyres deserve a careful look too. In a hot climate, rubber dries and cracks faster, especially on bikes that lived on a sunny balcony, so ask where it was stored and check the sidewalls for fine cracks.

Brakes are the part you never want to be surprised by. Squeeze each lever and make sure the bike stops firmly without the lever touching the handlebar. Look at the brake pads, which should have visible material left, and on disc brakes check the disc for deep grooves or a bend. A squeal isn’t always a disaster, but a spongy or weak brake is something to price in.

Then look at the chain and gears. A rusty or very dry chain suggests the bike hasn’t been looked after. Shift through every gear while turning the pedals, and listen for skipping or grinding. A new chain and a good clean are cheap fixes, but worn cogs and a stretched chain together can add up. If the seller says it just needs a small tune-up, ask exactly what that means.

Check the small parts too. Pedals should spin freely, the handlebars shouldn’t twist when you push on them and the saddle should stay at the height you set. Bolts and quick-release levers should be tight, and a missing or stripped bolt tells you something about how the bike was treated.

Size matters more than many beginners expect. Stand over the bike with your feet flat on the floor, and you should have a few centimetres of space between you and the top tube. Sit on the saddle and reach the handlebars comfortably without stretching. A bike that doesn’t fit will feel awful no matter how good the components are, so don’t let a bargain price talk you into the wrong size.

If you’re considering an electric bike, the battery is the thing to question. Ask how old it is, how often it’s been charged and how far it goes on a full charge, and check that the motor engages smoothly. Batteries are expensive to replace, so it’s worth seeing it charged and ridden before you agree on a price.

Take it for a proper test ride, even if it’s only a few minutes around the block. Listen for clicks and creaks, check that it tracks straight without your hands on the bars and make sure the brakes feel confident at speed. A seller who hesitates about a test ride is giving you useful information.

Ask for paperwork or at least some proof of where the bike came from, such as a receipt, a photo of the serial number or a story that makes sense. It protects you from buying something that isn’t the seller’s to sell. Also remember to budget a little for a service, a helmet, lights and a lock.
A good used bike is a quiet pleasure. You’ll spend far less, you’ll know exactly what you’re getting after a careful look, and when you eventually upgrade, you can pass it along to someone else who’s just starting out.